Recommended Valve Stem for a Lionshead 15" x 6" Aluminum Trailer Wheel
Updated 09/26/2025 | Published 04/29/2025
Products Featured in This Question
Question:
What bolt-on metal valve stem will fit on the Lionshead Aluminum Condor Trailer Wheel - 15 x 6 Rim - 6 on 5-1/2? It appears that the Americana Metal, Bolt-In Valve Stem - 1-1/4 Long Part Number: AM20906 is often suggested, but the hole on the wheel will not accept a 14mm socket.
asked by: Brian R
Expert Reply:
Hey Brian. Since you don't have enough room to tighten down the nut on the Americana Metal, Bolt-In Valve Stem item # AM20906, you'll need to use the Americana High Pressure Rubber Snap-In Valve Stem item # AM20904. It is rated up to 80 psi and will fit the 0.453" diameter rim hole in the Aluminum Condor Trailer Wheel item # LH26VR.
If you have any additional questions feel free to throw them into the comment box below.
Product Page this Question was Asked From
Americana Metal, Bolt-In Valve Stem - 1-1/4" Long
- Tire Repair Tools
- Valve Stems
- Bolt-In Stem
- 10 Inch Tire
- 12 Inch Tire
- 13 Inch Tire
- 14 Inch Tire
- 15 Inch Tire
- 16 Inch Tire
- 17.5 Inch
- Chrome
- 200 psi
- Silver
- Americana
more information >
Continue Researching
- Video: Review of Americana Tire Repair Tools - Replacement Rubber Snap In Valve Stem - AM93FV
- Search Results: metal valve stems
- Video: Checking Out the Americana Metal, Bolt-In Valve Stem
- Q&A: What Is The Max PSI The Lionshead Aluminum Liger Trailer Wheel LH49FR Can Handle?
- Shop: Replacement Rubber Snap-In Valve Stem - 1-1/4" Long - Up to 100 psi
- Shop: Americana Metal, Bolt-In Valve Stem - 1-1/4" Long
- Shop: Americana High Pressure Rubber Snap-In Valve Stem - 1-1/2" Long - Up to 80 psi
- Shop: Aluminum Sendel Mod Trailer Wheel - 15" x 6" Rim - 5 on 4-1/2
- Shop: Americana High Pressure Rubber Snap-In Valve Stem - 1-1/4" Long - Up to 100 psi
- Q&A: How to Find Metal Valve Stem for Lionshead Jaguar Wheel
- Search Results: bearing dust cap
- Q&A: Recommended Metal Valve Stem for Lionshead Aluminum Cheetah Trailer Wheel
- Q&A: Washer and Nut Diameter on # 20906 Metal Valve Stem
- Q&A: Recommended Valve Stem for a Condor Rim
- Q&A: Can Rubber Valve Stems be Swapped to Metal to Use TST Tire Pressure Monitoring System
- Q&A: Recommended Bolt In Metal Valve Stem for an Aluminum HWT Hi-Spec Series 03 Trailer Wheel
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
Jerred H.
9/26/2025
Hey Brian, did the Americana High Pressure Rubber Snap-In Valve Stem work out for your Aluminum Condor Trailer Wheel? I'm curious to know if it solved your issue since it might help others facing a similar challenge.