Looking For Replacement Wheel Studs For 2023 Alliance Paradigm 382RK 5th Wheel
Updated 10/27/2025 | Published 03/25/2025 >
Question:
Could you folks tell me which size lug studs for a 2023 Alliance Paradigm 382RK fifth wheel. I know they are 1/2 inch diameter, but dont know how long...2 to 2 1/2 seems to be the range. Please advise. I would like to purchase a few.
asked by: M. E
Helpful Expert Reply:
Hello, and thanks for getting in touch. We may have a replacement wheel stud for you, but there is no way to look up your camper to know exactly what size you would need. RV manufacturers just do not list this kind of information online.
If you can find a part number on your hub we MIGHT be able to look it up that way depending what you have. Aside from that the only way to really know what you need would be to remove a wheel stud and measure it. Not exactly practical for a trailer you use all the time. We would need detailed dimensions for the stud like in the picture below. If you can provide those dimensions, I am happy to look into it.
If you are wanting to keep extra wheel studs around in case of emergency, it might be better to just keep a spare hub on you. Should be a bit easier to determine what hub you need.
Leave a reply below with any other question or comments and I will get back to you.
Product Page this Question was Asked From
Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2 Inch Long
- Kodiak
more information >
Continue Researching
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Q&A: Replacement Wheel Stud that is .545 Diameter and 1/2 - 20
- Q&A: Replacement 1/2-20 Wheel Stud for 5200 lb. Axle
- Q&A: Replacement Wheel Studs for 6k Rated Trailer Hub with 6 Lug Bolt Pattern
- Q&A: Looking For 1/2" x 20 Wheel Studs With .500" Knurl Diameter
- Q&A: Replacement Wheel Studs with 2-1/2 Inch Length and .54 Inch Knurl Diameter
- Q&A: Replacement Wheel Studs For A 3,500lb Trailer Hub Assembly
- Q&A: Looking For Wheel Studs For Dexter 4,400 lb Axle
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Can You Flat Tow a MINI Cooper?
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Most Popular Wheel Bearings



Jesse M.
10/27/2025
Hey, were you able to measure the wheel stud on your Paradigm to confirm the right size? Once you have those dimensions, I can help narrow down the best match. Let me know what you find so we can get you set up with the right spares.