Adding Slide Topper To Slide Out On 2024 Torque T264 W/ Refrigerator Vent On Top Corner Of Slide
Updated 10/30/2025 | Published 02/22/2025
Question:
I have a 2024 Torque T264 with a slideout measuring 87 inches. The refrigerator is in the slideout, and the upper refrigerator vent is too close to the slideout flange to mount the topper bracket. What do you suggest for mounting the bracket?
asked by: Stephen
(click to enlarge)
Expert Reply:
Hey Stephen, thanks for reaching out. I have seen this before on some campers that have vents or windows on the slide out. It definitely makes things a bit tougher, It may be possible to install the brackets to the very top edge of the slide out, but the upper rail would also need to be move up a few inches. Otherwise the fabric wont be at the correct angle and you will have water pooling on the fabric, or worse running towards the camper. Also mounting the brackets to the top flange on the slide out can be tough since the surface isn't perfectly flat. So it can be done, but you or your installer might have to get a bit creative.
That said, the 91" wide topper part # LCV000168106 is a good size for your 87" slide.
Product Page this Question was Asked From
Solera RV Slide-Out Awning - 91" Wide - Black
- RV Awnings
- Slide-Out Awnings
- Extends 4 Feet
- 7-1/2 Feet Wide
- 86 Inch Wide
- 87 Inch Wide
- 88 Inch Wide
- 89 Inch Wide
- 90 Inch Wide
- 91 Inch Wide
- Black
- Lippert
more information >
Featured Help Information
Instructions
Continue Researching
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Slide Topper that Fits Flange to Flange Dimension of 79 inches
- Q&A: Can I Replace a Lippert Road Armor w/ a Reese Sidewinder?
- Q&A: Dimensions of Thomas Payne Trifold RV Loveseat and Sleeper
- Q&A: Slide Topper Recommendation for 2018 Grand Design Imagine 2600 RB
- Q&A: Recommended Bunk Ladder for 46 inch Tall Top Bunk of Bunk Bed
- Q&A: Recommended RV Slide-out Awnings for my 2020 Keystone Cougar 32BHS
- Q&A: Black Slide Toppers For 86-1/2, 145, & 156-1/2 Inch Flange-to-Flange Slides
- Article: What Is Flat Towing and How to Ditch the Trailer
- Article: How to Repair an RV Roof
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Wiring Diagrams
Jesse M.
10/30/2025
Hey Stephen, how did things go with mounting the topper bracket on your Torque T264 slideout near the refrigerator vent? Your setup sounds tricky with that tight space. Sharing what worked could really help others facing the same layout.