Need Bearing Kit For Hooper Trailer
Updated 11/03/2025 | Published 01/17/2025 >
Question:
Hooper Trailer VIN 4T0FB-1628E1005144. Need the bearing kit for maintenance.
asked by: John C
Expert Reply:
Hey John, thanks for reaching out. I wish I could give you bearing info, but there is no way to look up a trailer vin to know what bearings you will need. Trailer manufacturers just no not make this kind of information available online. If you contact dealership they may be able to run your vin, but that can sometimes be a headache. Your best bet will be to pull a hub and remove the bearings. Each bearing should have a number stamped on the edge, or you can measure the ID with a micrometer. Check each bearing as well as the seal size. That will be the best way to make sure you get the right parts. If you want to drop that info in the comments below when you have it I can get back to you with some part numbers.
Product Page this Question was Asked From
Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649
- Race L44610
- 1000 lbs Axle
- 2000 lbs Axle
- 2200 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Article: Trailer Wiring Diagrams
- Q&A:
- Q&A: Replacement Hubs/Bearings for 2000 Kendon Folding Trailer With 1-1/16 Inch Diameter Spindle
- Q&A: Replacement Bearing Kit for Detail K2 Mighty Multi A-Frame Utility Trailer
- Q&A: What is the Speed Rating of the Kenda Karrier KR53 ST175/80R13 Radial Tire w/a 13" Galvanized Wheel?
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Do You Have a Gooseneck Hitch for a 2021 Chevy Silverado 5500?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)


Jesse M.
11/3/2025
Hey John, were you able to pull a hub and check the bearing and seal numbers on your Hooper trailer? Once you have those details, I can help confirm if the BK1-150 kit is the right fit. Your update could make it easier for others doing the same maintenance.