Do You Have an Axle Replacement for My 2001 Yachtclub Snowmobile Trailer?
Updated 11/17/2025 | Published 12/15/2024
Products Featured in This Question
Question:
I have a 2001 yachtclub snowmobile trailer vin4H101121410297696 I need to replace the axle what do you recommend?
asked by: Mike B
(click to enlarge)
Expert Reply:
Hello Mike,
Thanks for including the picture of the axle tag. Unfortunately, it does not have the information I need most. It would be nice if all axle tags included what you need to find a replacement. We might have one that will work for you, the CE Smith Trailer Axle Beam with Idler Hubs - 5 on 4-1/2" - 54" Long - 1.8K # CE33201GA-HUB, without the hubs # CE33201GA. You will need to check some measurements to see if this is going to work. The Hub face is 57-1/2", and the spring center holes are 46-1/2". I have included a help article that goes over in detail how to measure. If you are coming up with way different measurements, feel free to shoot them my way and I will take a look to see if we have something that does match your measurements.
Product Page this Question was Asked From
CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Marine Grade
- No Hubs
- 1800 lbs
- Spindles Only
- 46-1/2 Inch Spring Center
- 57-1/2 Inch Hub Face
- No Drop or Lift
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement 1-1/2 Inch Square Axle for a Boat Trailer
- Q&A: Will CE Smith 57-1/2" Long 1.8k Axle Work With 4 on 4 Inch Hubs On Harbor Freight Trailer
- Q&A: Picking Out Axle for 1970 Dilly Boat Trailer
- Q&A: Replacement Axle for Trailer with 46-1/2 Inch Spring Center
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
- Q&A: Replacement Hubs and Bearings for Harbor Freight Trailer
- Q&A: Axle Replacement 1720 Harbor Freight Trailer
- Article: How to Measure a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Article: Best Boat Trailer Jacks
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
Kate F.
11/17/2025
Hey Mike, did the measurements on your Yacht Club trailer line up with the CE Smith axle options we talked about? Once you compared those hub face and spring center distances, were you able to find a good match? Your update could make it easier for others replacing older trailer axles.