Distance Between Quick-Grip Clamps on Thule Force XT XXL Rooftop Cargo Box

Question

Question:

What is the width from left to right of the clamps as they protrude through the bottom of the carrier?

asked by: Chase A

0

Expert Reply:

Hi Chase; the distance between the sets of Quick-Grip clamps from left to right on the # TH6359B is 24".

expert reply by: Robin H

0

Robin H.

11/17/2025

Hey Chase, did that 24-inch spacing between the Quick-Grip clamps line up with your carrier setup? Knowing how it fit could help others trying to match the same spacing.

Answer 1

The Rhino-Rack Pioneer Platform Rack 84" Long x 49" Wide #RR73AB, which is a fit for your 2011 Toyota Land Cruiser, can certainly accommodate the Thule Force XT L Rooftop Cargo Box - 16 cu ft - Black AeroSkin #TH6357B. In order to do so,…

view full answer...

Answer 2

The difference between the Rhino-Rack Accessory Bars #RR43119B and #RR43137B has to do with the actual crossbar designs. The Heavy-Duty #RR43119B are rectangular bars that are built specifically to carry certain accessories like the Hi-Lift Jack and…

view full answer...

Answer 3

Rhino Rack offers a crossbar adapters for the top of their Pioneer Platform trays with the part #RR43138B for a 53 inch bar, part #RR43119B for a 48 inch long bar, and #RR43232B for a 24 inch long bar which attaches to the top of the platform and…

view full answer...

Answer 4

Hey Alex, we only have the Rhino Rack Pioneer Platform accessory bars in the 24 inch length with the part #RR33AP that you referenced. How come you'd need these to be longer?

view full answer...

Answer 5

I am not 100 percent clear what you are referring to in terms of cross section but I can tell you that each of the Thule Force XT cargo boxes will fit crossbars that are a maximum of 3-1/2" wide x 1-11/16" tall. They do have different…

view full answer...

Answer 6

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 7

If I understand correctly you want to know the distance side to side from one set of clamps to the other on the Yakima SkyBox 18 #Y07336 as well as the 16, #Y95AV. On both of these boxes that distance is 21 inches. This is from the outside of one…

view full answer...

Answer 8

Hey Nick, thanks for reaching out! The Powerbuilt Unijack Bottle Jack with Built-In Jack Stand #ALL620471 weighs slightly over 23 lbs. I know the resting height is 11" and the lifted height is 21", but aside from that I don't have any…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Distance Between Quick-Grip Clamps on Thule Force XT XXL Rooftop Cargo Box

Continue Researching