Will Rhino-Rack Zwifloc Channel Nuts Fit with Rhino-Rack RT Track

Question

Question:

Will Rhino Rack Zwiflox channel nut work n Rhino Rack RTX track? If not, is there an alternative channel nut or more universal track for accessories ? I am building aluminum storage box 40”w x 30”l for roof of my Sprinter van. I have attached photo. I will NOT be using molle panel.

asked by: Kevin

0

Expert Reply:

Hey Kevin, thanks for reaching out!

Do you have a part number for the RTX track? I've been trying to look it up from Rhino-Rack but I'm not seeing anything.

The Rhino-Rack Drop-In Channel Eye Bolts # RR46XP were designed for Rhino-Rack Pioneer platform, Reconn-Deck truck bed cargo system, and Vortex crossbars so while it isn't out of the question if they will fit another Rhino-Rack product, I want to make sure I check in with the correct product.

expert reply by: Jon G

0

Kevin

10/23/2024

My apologies, RTV not RTX. Here is a part number RTV208

Reply

Jon G.

10/23/2024

@Kevin Ah, that makes more sense - thanks for the clarification! The Zwifloc system will be too thick to fit in the RT Track # RRRTV208, but the Rhino-Rack Drop-In Channel Eye Bolts # RR46XP do come with some alternative hardware that allows you to install them on the RT tracks.

Reply

Kevin

10/23/2024

I noticed that front runner FR34JJ as well. Are the channel dimensions the same? If not which track is more universal and will accept more accessories than the other? Is there some other track that would be better and more universal? Thanks in advance.

Reply

Jon G.

10/24/2024

@Kevin The RT tracks are about the same dimensions as the Front Runner tracks but they are slightly taller and a little less wide. When I checked on the T-Slot dimensions for the Front Runner track I messed with the eye bolts a little that come with it and they are really easy to use so you might consider just sticking with them to begin with. The Zwifloc feature is designed around the Pioneer Platform and Reconn-Deck systems so unless you're using one of them you won't see much of a benefit.

Reply

Answer 1

Rhino-Rack tracks #RRRTV168 are 66-1/8" long x 1-1/2" wide x 1/2" tall. Yes, they are compatible with the RLT600 legs #RRRLT600. They are also compatible with Rhino-Rack RLTP, RLTF, and RLT500 legs.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 7

Hey Tom! I am sorry but the Under-Bed Rail and Installation Kit item #RP30126 only fits up to the 2016 model years and no one makes a comparable after market puck system for the 2024 F-350's. For an autoslider set up you will have to add a set of…

view full answer...

Answer 8

Hey Bob, none of the Torklift camper tie downs we offer fit the versions of your 2023 Ram 2500 that have the deployable step. The Happijac tie downs like the part #LC236326-205221 that fits your truck wouldn't have this problem though.

view full answer...

Answer 9

Hey there Harry, that's a good question, as the difference is the strength of the aluminum vs. polycarbonate Retrax tonneau covers that fit your 2024 Ram 3500 with a 6-1/2 foot bed. The aluminum RetraxPRO MX Hard Tonneau Cover #RT80232 has the…

view full answer...

Answer 10

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

We typically will recommend sliding 5th wheel hitches for trucks with a bed shorter than 8 feet, unless your 5th wheel has dished-in front corners an the 5th wheel manufacturer specifically states that a sliding hitch isn't needed I'd…

view full answer...

Will Rhino-Rack Zwifloc Channel Nuts Fit with Rhino-Rack RT Track

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching