Availability of Replacement Grease Seal Part 30624
Updated 05/28/2014 | Published 05/24/2014
Question:
Im looking for a grease seal to replace a very old one with no brand name stamped on it, just the number 30624. I measured it as 3.062OD and 2.160ID. Do you have something similar? The closest I am able to find on the internet is a Timken 710438, but it doesnt seem to match exactly. Thank you in advance!
asked by: Tim
Expert Reply:
My research on this grease seal part number turned up only its specified inner and outer diameters, which are 2.125 and 3.066 inches respectively. It is not at all unusual for a used seal to measure differently than when it was new; the effects of wear and the process of removing the seal can often distort it. Also, the rubber compounds at the inner diameter can shrink and deteriorate and give a misleading dimension.
We do have two grease seals with this exact 3.066-inch outer diameter and both can be seen on the link provided. Part # SL200 has a 2.000-inch inner diameter and part # SL226 has a 2.250 inner diameter. Based on your measured 2.160 inner diameter I suspect part # SL226 is the best option.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 2.00 Inch I.D.
- 3.07 Inch O.D.
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Looking for Replacement Bearing Kit for Hub with Bearings 15123/25580
- Q&A: Will Redline Grease Seal # 1105-100-031 Replace Hadco 3122 Grease Seal
- Q&A: Which Replacement Air Conditioner for Advent AC150 Unit on 5th Wheel Trailer
- Q&A: Is There a Hub Conversion Kit for Mobile Home Trailer Axles
- Q&A: How to Position the Lippert Shocks on a Single Axle Trailer
- Q&A: Replacement Marker Lights for Furrion F0S04TDE-RD/SY Lights
- Q&A: How to Pick Out Replacement Grease Seals for Hadco 3122
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)