Front and Rear Anti-Sway Bars for a 2019 Fleetwood Southwind 34C

Question

Question:

need front and rear sway bar kit to fit Fleetwood, south wind 34c class a motorhome,

asked by: Jim C

0

Expert Reply:

Hey Jim, thanks for reaching out!

To add front and rear anti-sway bars to your 2019 Fleetwood Southwind 34C you'll need the following:

- Front # RM-1139-148
- Rear # RM-1139-145

Please note that the rear will only fit if your shock mounts are parallel to the ground and have 2 holes, like what you see in the attached photo from Roadmaster.

expert reply by: Jon G

0

Anti-Sway Bar 1139-145 Fitment
(click to enlarge)

John C.

9/5/2024

Thank you for getting back to me Will look to see if they will work Then put in an order Jim Collins

Reply

Answer 1

You're already on the right track with everything you looked at. Your 2018 Thor ACE 30.3 has a GVWR of 18,000 lbs so I recommend the following: -Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR…

view full answer...

Answer 2

Hey Ron, welcome back! Hope that steering stabilizer item #RM47MR is working out for you! Adding or upgrading front and rear sway bars is definitely going to be the way to go. These will take out that top heavy swaying feeling and give you a more…

view full answer...

Answer 3

Hey Kurt! Yes, the Roadmaster Rear Anti-Sway Bar #RM-1139-146 can be used with air bags on your 2013 Winnebago Vista 27N. The two will actually work well together and the anti-sway bar will further improve your ride and reduce fatigue. Any big trips…

view full answer...

Answer 4

Good question, Gary, and you’re smart to ask before doubling up. You’ll actually want to replace the Reflex, not run both. They do the same job, but the Safe-T-Plus #ST88MR is a clear upgrade. The Reflex uses universal fit and coil springs for…

view full answer...

Answer 5

Hi Ed; unfortunately, that is a pretty common problem with new motorhomes. The front and rear anti-sway bar are typically the best way to start so adding the Hellwig Front Anti-Sway Bar #HE26GR is a great idea. After that, I recommend a steering…

view full answer...

Answer 6

etrailer is from the US. We are right in the middle near St Louis MO in a town called Wentzville. But we sell products that are made all over. Some from US and some from other countries as well.

view full answer...

Answer 7

Hey Carolyn, the XD versions of the Sprinter 3500 chassis are the dually versions so you would need to make sure the sway bar you have is compatible with dually models. For example the Hellwig #HE77YR is a bar that does work with the dually models…

view full answer...

Front and Rear Anti-Sway Bars for a 2019 Fleetwood Southwind 34C

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching