Is There A 5-Pin Flat Female To 6-Pin Round Male Adapter Wire Harness
Updated 08/30/2024 | Published 08/26/2024
Products Featured in This Question
Question:
Do you make a 5 pin flat female to 5 pin round male 6 inch harness?
asked by: Gary R
Expert Reply:
Hey Gary,
There isn't an adapter already made for this but you can easily make one yourself with the # HM47900 and # HM47415. The 6-way has a 12v hot pin and brake output pin and the 5-way only has a reverse lock out pin so you'll have to decide what function you want to lose and wire the pins as needed. I recommend using some heat shrink butt connectors # DW05744-5 and # DW05745-5 and staggering them to keep the harness thinner. You can then wrap all the wiring up with some electrical tape to protect it.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
6-Pole Square Trailer Wiring Connector Kit (Car and Trailer Ends)
- Custom Fit Vehicle Wiring
- Wiring Extensions
- Universal Fit
- 6 Square
- Plug and Lead
- Hopkins
more information >
Continue Researching
- Q&A: Making a 6-Way Square Adapter for an Artic Fox Camper
- Q&A: Recommended Flat Towing Setup for a 2026 Chevrolet Colorado ZR2
- Q&A: Solution for Vehicle Battery Draining When Flat Towed by Motorhome
- Q&A: How to Make 6-Way Square to 7-Way Adapter
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Trailer Wiring Connector On 2004 Holiday Rambler Endeavor
- Q&A: How to Wire in a Brake Controller in a 2005 Holiday Rambler Endeavor
- Q&A: How to Make a 6-Way Square to 4-Way Flat Trailer Wiring Adapter
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Best Hitch Cargo Carriers
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Brake Controller Installation: Starting from Scratch