bing tracking image
Q & A Icon

Is There Longer Version of SportRack Hitch Pin Bolt # 05002400000  

Updated 01/20/2026 | Published 08/12/2024

Question:

I purchased this bolt 05002400000 for our sportrack 4-bike platform carrier however it is not long enough to pass through our hitch receiver and have the hole for the pin clip available on the opposite side. Vehicle in question is a 2017 Toyota Sequoia - and it seems the factory receiver is thicker than normal almost double-hulled. I purchased this bolt as an alternative for the keyed/locking bolt assembly that came with the bike carrier a slightly longer bolt but no hole for a pin, that bolt is also not long enough to work on this on this vehicle. Is there a version of this bolt that is longer than 3 1/4 inches that might work for my truck? Thanks, Tim

0

Expert Reply:

I wish there was but Sportrack does not offer a longer version of the bolt # 05002400000 that you referenced. It's probably not an ideal solution but you might take the bolt to a local hardware store and see if you can find a longer bolt and drill a hole in the end of it for the clip.

expert reply by:
0
Jameson C
Jameson C. profile picture
Etrailer Expert

Jameson C.

1/19/2026

Hey Tim, were you able to find a longer bolt at your local hardware store that worked with your Sequoia’s hitch receiver? Knowing what you ended up using could help others with the same thicker factory setup.

Tim C. profile picture

Tim C.

1/20/2026

@JamesonC. I didn’t source another option. I sold the rack, as it wasn’t getting much use anyway. Thanks for the follow-up.
Jameson C. profile picture
Etrailer Expert

Jameson C.

1/20/2026

@TimC makes sense!

Product Page this Question was Asked From