Hitch and Other Towing Accessories Needed to Tow Pop-Up Camper With 2009 Kia Sedona
Updated 05/09/2014 | Published 05/07/2014
Products Featured in This Question
Question:
Hello. I am new to this and learning as I go. I have a 2009 Kia Sedona and I need an entire kit to pull a pop-up camper. From trailer hitch to wiring harnesses. One for a round plug with 6 pins which i was told included the electronic brakes and I guess some sort of 4 pin flat harness for the trailer lights ... I think.... anyways, a little point in the right direction would be appreciated. The pop-up is 2600lbs and it has a 2 in receiver. Thanks for your help.
asked by: Jose R
Expert Reply:
To tow your pop-up, you'll need a hitch, wiring, a ball mount, trailer ball, brake controller and a install kit for the brake controller.
The hitch needed will depend on if your Sedona is the EX/LX or the base model. For the LX/EX model, I'd recommend the Curt # C13345. For the base model, go with the Draw-Tite # 75551. For the trailer wiring harness, use the Tow Ready # 118410. For a ball mount, use part # 2752. Your camper should have the necessary ball size stamped into the coupler somewhere. For a 1-7/8 inch ball, use part # 19260 or # 63845 for a 2 inch ball.
The above would cover the basics, but in order to actuate the brakes on your pop-up, you'll need to install a brake controller. I recommend a proportional controller like the Tekonsha Prodigy P2, part # 90885. The brake controller install kit, part # ETBC7 is also needed. The ETBC7 would provide a 7-way blade style trailer connector. If your pop-up has a 6-way round pin connector, you'll need an adapter like part # 47549.
My research indicates that the towing capacity of your Sedona is 3500 lbs, which I would recommend you confirm for yourself. I've linked you to some install videos that you might find helpful.
