Availability of Spacer That is Near Seal of Trailer Hub
Updated 05/20/2024 | Published 05/07/2024
Question:
I need a part identified so I can purchase. I would like to send a couple of pics. It seems to be a spacer inside the hub of a small old boat trailer. It looks like the seal rides on it. Thanks
asked by: Bill
0
Expert Reply:
Hey Bill, it sounds like maybe the sleeve of the Bearing Buddy seal kits like what comes with the part # BB60011 but if you wanted to email me back with what you have I can see if it's something we offer. I attached a picture that shows what comes with the Bearing Buddy seal kits.
expert reply by:
Jameson C
0
Bearing Buddy Seal Kit
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Spindle Grease Seal Set for 25580 Inner Bearing and 2.441 Bearing Buddy
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.38 Inch I.D.
- 3.37 Inch O.D.
- Bearing Buddy
more information >
Continue Researching
- Q&A: Wiring Diagram for 7-Way Round Pin Trailer and Vehicle Side Connectors
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Torque Specification for Lugs Nuts on 5/8-Inch Stud on Dexter Hub
- Q&A: Is there a Replacement O-Ring that Sits at the Back of the Spindle Before the Backing Plate?
- Article: Most Popular Wheel Bearings
- Q&A: Is It Okay for Tires to Crack at Sidewall and Tread
- Q&A: Need 8-Lug Brake Drum For 2005 Keystone Montana
- Q&A: Looking for 6 Galvanized U-Bolts that are 3 Inches Square with 7/16 or 1/2 Inch Diameter
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
Bill
5/7/2024
That doesn’t look like it. How can I attach a couple of pics? It is 1” ID and 1.25” OD and about 0.50” thick.