How to Match Up Wiring Connectors Between Motorcycle 4-Pin Square and Trailer 6-Way Round

Updated 05/01/2024 | Published 04/30/2024

Products Featured in This Question

Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Vehicle End

(161)

$9.64

Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector

(1714)

$81.58

Question:

I have a Wags motorcycle trailer that has a 6 pin round connector. Motorcycle has a 4 pin square connector. What type of adapter is needed to connect the cycle to the trailer?

asked by: Russ H

4-Pin Square Connector on Motorcycle
(click to enlarge)

6-Pin Round Connector on Trailer
(click to enlarge)

Expert Reply:

Thanks for the photos, Russ!

The square 4-Pin plug you have on your motorcycle isn't common so you'll need to cut it off and rewire it to the Pollak 6-Pole # PK11609 so they match - you'll just have to match up the pins per function.

You might also need to install the Curt Powered Tail Light Converter # C59236 if your motorcycle has the brake light circuit separated out on it's own. In this case you'll install the Curt wiring and then cut off that 4-Way and install it to the Pollak 6-Pin.

expert reply by: Jon G