How Does an Electric Reverse Lockout Solenoid on a Titan Coupler Get Wired

Updated 04/30/2014 | Published 04/27/2014

Question:

were do I connect both wires

asked by: Fernando C

Helpful Expert Reply:

On the reverse lockout solenoid on Titan coupler # T4750820, one wire will need to be grounded to the trailer frame. The other wire needs to connect to the reverse light circuit on the trailer side connector. When the vehicle is placed in reverse it powers the solenoid and will not let fluid back to the brakes allowing you to back the trailer without the brakes engaging.

expert reply by: Michael H