Bolt On Trailer Jack Recommendation for 3,500 lb Trailer with 10 inch Lift

Question

Question:

What bolt on jack should I get for my boat trailer? The trailer and boat are between 3500 and 4000 pounds and needs a 10” lift. There so many to choose from. Let me know. Thanks

asked by: Joel

0

Expert Reply:

Hey Joel, the Fulton XLT bolt thru jack # F26ZR would be a great option that covers everything you are needing. It is a bolt-on swivel jack with 10 inch of lift.

This jack has a 1,500 lb lift capacity which would be way more tongue weight capacity than a 3,500 lb trailer would have so it would jack up and down easily.

expert reply by: Jameson C

0

Answer 1

The correct replacement for the Fulton Magnum Series Trailer Jack on your trailer is the Fulton Bolt-Thru Swivel Marine Jack part #FXP10W0301 if you have a bolt-thru mounting bracket or part #FTJ120W0301 if you have a snap-ring mounting bracket. I…

view full answer...

Answer 2

You can install the Fulton F2 Jack, #F1413040134, on your trailer, but you will need to pick up smaller u-bolts. The u-bolts included with this jack fit 3 inch x 3 inch and 3 inch x 4 inch frames. You could pick up two of the CE Smith U-Bolts,…

view full answer...

Answer 3

I went ahead and checked out your Fulton XLT Bolt-Thru Swivel Trailer Jack #F26ZR, and the Fulton F2 Swing-Up Trailer Jack, and you actually won't be able to use this mounting bracket with your XLT jack due to the fact that the plate for the F2…

view full answer...

Answer 4

Hey Cody! The MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat item #MA00-04002K will do exactly what you are looking for. It has a manual lift that you can control from the inside of your tear trailer. The lid does not have to be open all the way…

view full answer...

Answer 5

The foot on the inner tube on Pro Series trailer jack #PS1401480303 is attached, all one part, so you would not be able to add a wheel. None of the pipe-mount swivel jacks come with a wheel. Your best option would be to replace the jack with…

view full answer...

Answer 6

For your MaxxAir 4951KS the correct replacement lid is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K (smoke) or part #MA10A40002K (white). The shape of the lid is slightly less rounded as your current lid but it will…

view full answer...

Answer 7

The Ultra-Fab Solar-Powered Plumbing Vent for Motor Homes - 7" Diameter x 3-3/4" Tall #UF53-945001 may be a good option for you. The fan will only work when you have solar charge which can work even on a cloudy day, but obviously would be…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Bolt On Trailer Jack Recommendation for 3,500 lb Trailer with 10 inch Lift

Continue Researching