Wet Bolt For 1-3/4" Double Eye Springs Without Silver Coating

Updated 03/12/2024 | Published 03/11/2024

Products Featured in This Question

Step Wet Bolt for 1-3/4" Double Eye Springs

(90)

$23.90

Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long

(780)

$10.50

Question:

Do you have a version of this wet bolt that does not have the silver coating? If so what is the product number? Usable 9/16 inch diameter shoulder is 2 and 5/16 inches.

asked by: David G

Expert Reply:

There is a similar but not exact version of the Step Wet Bolt for 1-3/4" Double Eye Springs # 34007-187-00 without the silver coating. The closest is the following:

- Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs # 126B2

The # 126B2 has the same 9/16" diameter and usable length of 2-5/16" but has a 9/16"-18 fine thread compared to the 7/16"-20 thread of the bolt you asked about.

expert reply by: Kyle S

David G.

3/12/2024

Thanks Kyle. The original bolt was part of a Lippert Equa-Flex system with a 7/16 inch thread and lock nut. Can the 9/16 inch thread version be used as a compatible OEM substitute?