Replacement Circuit Board For A MaxxAir MaxxFan RV Roof Vent

Question

Question:

Need Maxxair replacement boards: INC115342 Do you have it?

asked by: James P

0

Expert Reply:

Hi James,

The INC115342 part number you gave me unfortunately doesn't come back to anything. Do you know what the model number of your vent is? If not the boards will typically have a tiny white sticker on them with some info that I could use to look for a replacement. If you want to send me some pictures of the current circuit board I'd be happy to take a look.

expert reply by: Kevin C

0

James

3/4/2024

Model #4900N

Kevin C.

3/5/2024

@James Looking at MaxxAir's replacement part chart the 4900N requires the 10-21275N circuit board, which we unfortunately do not offer. I believe that this is a discontinued component so the places that do still offer it are price gouging. Because of this the best option is going to be to replace the vent completely with a newer model so that replacement parts are actually available and so that you'll have a warranty. I've attached a link to our selection of vents below but I can pick out the best option for you if you can tell me which features you'd prefer. If you narrow it down to a few options I can also compare them for you to help make a decision.

Helpful Links

dept-pg-rv_vents_and_fans-pc-12v_fan.aspx

Answer 1

The 10B21275KE part #MA39FR replaces the 10-21275KE you mentioned as well so if you had an older model number you could use it in same application.

view full answer...

Answer 2

We do have the exact parts you need and yes you can order it through us! I verified with the manufacturer for you that the correct parts for your MaxxAir 4801K are the following: - Replacement Operator Mechanism #MA10-20281K-1AF - Replacement Lift…

view full answer...

Answer 3

Since you have the MaxxFan model 00-4000K the correct circuit board replacement part number from us is the part #MA10A21276K.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Replacement Circuit Board For A MaxxAir MaxxFan RV Roof Vent

Continue Researching