Do You Have a 3,500LB Axle With 91" Hub Face With Leaf Springs & U-Bolts For Tandem Axle Car Hauler?

Updated 02/06/2024 | Published 02/05/2024

Products Featured in This Question

4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long

(2008)

$47.94

U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts

(1972)

$69.59

CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc

(969)

$34.94

Question:

i am looking for a 3500lbs axle for my flat bed car hauler. flange face to flange face is 91 inches. spring perches are 78 inches center to center 1.5 inch wide. tube is 2.400. need both springs they are 25 1/4 center to center 4 leaf 1 3/4 inch wide. 4.25 5 lug bolt pattern. also need need the u bolts. axel is mounted on the spring not under it is just a straight axle.

asked by: George M

Expert Reply:

While you are going to have to special order your axle as it is a uncommon size we do not carry, I can help you with the leaf springs and U-bolts. We do have the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles # e54SR but do note these are 25-1/8" long rather than 25-1/4". The 1/8" difference is not going to cause you any issues as the shackles will take care of the minor difference in length.

We have the U-bolts in a Zinc and Galvanized Kit # CE23002 or Painted # APUBR-1. Clearly the Zinc and Galvanized kit will last longer and is going to be a better option if you live in an area that uses road salt or is close to an area with salt water.

expert reply by: Bud M