Recommended 6-Pin to 4-Way Adapter
Updated 02/07/2024 | Published 02/04/2024
Products Featured in This Question
Question:
I have a class A RV with a 6-pin round receptacle for trailer wires. I bought a 2015 Jeep Wrangler which is setup for towing with a Blue Ox baseplate. The wiring on the baseplate is a 4-flat receptacle. What can I use to connect the 6-pin round receptacle on the RV to the 4-pin round receptacle on the Blue Ox baseplate? I have pictures if that will help.
asked by: Mike M
0
Expert Reply:
No, need for pictures! I have exactly what you need. It is the Pollak 6 Pole to 4 Pole Connector Adapter item # PK12717. This will plug into your RV's 6-pin and allow you to control your Wrangler's lights through its 4-way connector.
expert reply by:
Jerred H
0
Product Page this Question was Asked From
Continue Researching
- Q&A: Adapter to Go From Blue Ox Base Plate Kit to Demco Tow Bar
- Q&A: Does etrailer Base Plate Kit for 2025 Ford Maverick Lariat Require ACC Sensor
- Q&A: Is There Trimming Required to Install etrailer Base Plate Kit # e96GV on 2025 Ford Maverick
- Q&A: Do You Have a Cover for a etrailer SD Tow Bar?
- Q&A: Parts Needed to Flat Tow 2017 Winnebago Sunstar 29VE
- Q&A: Recommended Hitch for a 2026 Honda Pilot
- Q&A: Is It Possible Over Tightening Cause An Air Leak On The Inflation Kit?
- Article: Can You Flat Tow a Ford Ranger?
- Article: Snow Tire Chain Overview: How to Buy the Right Tire Chains
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: How to Choose a High-Low Adapter
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing