Can Yakima Crossbar Clamps Fit More than Just Yakima LockNLoad Platform

Question

Question:

Does the Yakima cross bar clamp compatible with Rhino Rack RR7216 to mount on crossbars?

asked by: George

0

Expert Reply:

The Yakima Crossbar Clamps part # Y05039 is only compatible with the Yakima LockNLoad Platforms and would not work with any of the Rhino Rack Pioneer Platforms.

expert reply by: Jameson C

0

Answer 1

The Inno eye bolts part #IN37FR are different slightly than the eyebolts that come with the Yakima part #Y05036. In general these both perform similar functions but they wouldn't be considered to be interchangeable.

view full answer...

Answer 2

Hey Lorenzo, The Inno Roof Deck Platform Rack for Crossbars #INA510 can fit crossbars up to 3-1/2" wide x 1-3/8" tall so you'll have to check the dimensions of your crossbars, but there's a good chance the clamps will fit your…

view full answer...

Answer 3

The Inno Shaper 100 Roof Cargo Basket - Channel Mount #INXA569 is what you'll need to use if you want to install the cargo basket via the T-Slots on your crossbars. The Inno Shaper 100 Roof Cargo Basket - Square Bars #IN569 you're interested…

view full answer...

Answer 4

For eye bolts that will fit in the t-slots of a Yakima LockNLoad Platform Rack, you can use the Eye Bolt Kit for Rhino-Rack Pioneer Platform Rack #RR43178 which will come with 4 eye bolts.

view full answer...

Answer 5

I spoke with Yakima about the Yakima LockNLoad Platform Rack like part #Y05047-39 and they informed me that Rhino-Rack Pioneer Rack Accessories should work but this is not something they can test. I have attached a list of these accessories for you…

view full answer...

Answer 6

Thanks for the photo, and yes, the LockNLoad will indeed fit to Rhino-Rack Vortex aero crossbars like your Rhino-Rack Vortex Crossbars for Retrax XR #RRVA180B-RRRLT600. You'll just need adapters to mount the platform, and here are the part…

view full answer...

Answer 7

Hello Robert, thanks for reaching out. No, Yakima doesn’t make a bracket to run a LockNLoad platform directly on the old rain gutter towers like the #Y00101. Those platforms are built around their newer tower system, and the only adapters they offer…

view full answer...

Answer 8

You should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part #Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not have any problems…

view full answer...

Answer 9

I checked with Yakima and the largest LockNLoad Platform Tray that will work with a roof rack system with two crossbars is the 60" Long x 54" Wide Yakima LockNLoad Platform Roof Tray #Y05045. To mount this tray to your BMW you will need the…

view full answer...

Answer 10

The Conduit Clamp Set #RRBC2 that you referenced is designed specifically to mount to the C-channels that are present on Rhino-Rack Heavy Duty Crossbars. These particular model bars feature a unique C-channel that differs from the standard opening on…

view full answer...

Answer 11

The Replacement Clamp #RRSP112 is a single clamp for the Rhino-Rack Roof Mounted Steel Cargo Basket #RMCB. Included is the clamp, screws, and all parts to secure the basket at one point to your crossbar.

view full answer...

Can Yakima Crossbar Clamps Fit More than Just Yakima LockNLoad Platform

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching