20" Wide Range Hoods Available For Replacing Obsolete Ventline Range Hood

Question

Question:

Do you have this 20 inch rangehood in stock and what is the price

asked by: Phillip

0

Expert Reply:

Here is a list of the 20" wide range hoods we currently offer.

Ventline Pinnacle Ductless RV Range Hood with Light - 12V - 20" Wide - Black # VE26SR
Ventline Pinnacle Ducted RV Range Hood with Light - 12V - 20" Wide - Black # VE38SR
Ventline Pinnacle Ducted RV Range Hood with Light - 12V - 20" Wide - Black w/ Stainless Steel # VE98SR
Ventline Pinnacle Ductless RV Range Hood with Light - 12V - 20" Wide - Black w/ Stainless Steel # VE58SR

expert reply by: Bud M

0

Answer 1

Hello Tobie, Welcome to etailer, I am glad you found us! The actual overall depth of the 22" Wide Pinnacle Ventline/Dexter ducted range hood #VE78SR is 18 inches from front to back. This measurement represents the full physical depth of the unit…

view full answer...

Answer 2

Unfortunately Don, you are going to need to a new range hood like the Ventiline #VE48SR as the parts for your Greystone are obsolete.

view full answer...

Answer 3

The Ventline Pinnacle ducted Series RV Range Hood w/ Led Light - 12V Fan #VE38SR is 20" wide X 18" deep. Attached is a review video of the range hood for you to check out.

view full answer...

Answer 4

Hey Ron! There is a tab on the bottom of the Ventline Exterior Wall Vent #VE35VV that you'll use to disconnect the outer cover (see attached photo). I'm also linking a video where Steve goes over this tab towards the end of the video for you…

view full answer...

Answer 5

Hey Nancy, a replacement cover like our part #V2111-13 would be our best option but it is a little longer than what you have but it is 5.5 inches tall like you mentioned having. The overall length is right at 12 inches. This is white in color. Let me…

view full answer...

Answer 6

The light for the Ventline Pinnacle Ductless RV Range Hood with Light #VE48SR is encased in plastic that pops into slots in the vent. To get a replacement you would need to reach out to Ventline since it's not a generic light. Once you get the…

view full answer...

Answer 7

Hey Susan, sorry to hear about your microwave. Due to it's age I wasn't able to find it's dimensions to pick out a replacement that would closely match it but I was able to determine it was a 1.0 cubic foot microwave like the High Pointe…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

20" Wide Range Hoods Available For Replacing Obsolete Ventline Range Hood

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching