Replacement Surge Brake Actuator and Calipers for 2001 Four Winns Boat Trailer

Published 07/18/2023

Products Featured in This Question

Dexter Zinc-Plated Brake Actuator - Drum - 2-5/16" Ball - Bolt On - 8,000 lbs

(173)

$488.94

Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs

(194)

$119.62

Dexter Zinc-Plated Brake Actuator w/ Electric Lockout - Disc - 2-5/16" Ball - 12,500 lbs

(55)

$671.09

Question:

I have a 2001 four winns random axle trailer. It currently has a Titan surge brake on the front titan model 6 p/n 4079200 2 5/8 inch coupler and disc brakes on the rear axle. I would like to replace the surge brake bolt on up front and need to replace the disc brake calipers. Can you recommend what I should purchase. Thank you

asked by: John

Expert Reply:

The direct replacement for your Titan Model 6 4079200 is the # T4079200. However, you have disc brakes on your trailer, not drum brakes. For a replacement designed for drum brakes you can use the # T4750820 which is the Model 10 and replaced the Titan 4750820. This has a 12,500 lb capacity and also fits a 3" channel.

For replacement calipers you will need to know the axle capacity as well as the brand. For example, if you have 3,500 lb axles with Kodiak brakes you can use the # KDBC225DAC. If you had Dexter brakes you would need the # K71-624-00. If you can find this information and send it to me I can see if a replacement is available.

I have attached some review videos below along with a link to all of our replacement calipers for your reference.

expert reply by: Robin H