How To Pair Wireless Remote for Air Lift WirelessAIR Compressor System # AL74000

Updated 06/15/2023 | Published 06/14/2023

Question:

How do I “pair” the manifold by using the ignition or the display?

asked by: Dave E

Expert Reply:

Here are the steps to pair the wireless remote/screen for the Air Lift WirelessAIR Compressor System # AL74000.

1. To initiate pairing mode, remove the main system fuse, wait five seconds and reinstall.

2. Press any button to wake up the wireless controller. It will automatically go to the pairing screen if it is not already paired with a manifold. Use the up and down arrow buttons to navigate the pairing menu. Select the device that matches the manifold serial number located on the side of the manifold (Figs. B.2 & B.3).

3. The device will indicate “connecting” when it is connecting to a device.

4. Once complete, the wireless controller will either indicate “Pairing successful,” which means the devices are paired, or “Pairing unsuccessful,” which will require the user to pull and reinstall the fuse and try again (Return to Step 1). Once the wireless controller is connected to the manifold, it will automatically connect each time the manifold is active and the controller is woken up.

expert reply by: Bud M