Replacement Conical Washer Recommendation for a EAZ-Lift Weight Distribution Hitch

Question

Question:

Hi, I am looking to replace the hardware on my 800 EAZ distribution hitch. Not know the part number I am not able to cross reference. I over torqued the conical washers, cracking one of them, make me feel like I may have damaged the bolts too. I’d prefer to replace all the bolts now. Will the Curt bolt kit work with my Eaz? They look very similar. Thanks

asked by: Stan B

0

Expert Reply:

If the conical washers on your EAZ weight distribution hitch are 3/8" washers, then the Draw-Tite Trailer Hitch Conical Tooth Washers - 3/8" Diameter # 01292006-020-01 would work just fine.

Since it's just a conical washer you're needing replacing you could use any conical washer that matches the one you broke and you'd be fine, these are not specific to the system.

expert reply by: Bryce D

0

Answer 1

The 3/8" Conical Tooth Washer #01292006-020-01 is the closest we have to a 7/16" inner diameter. We have the 7/16" Lock Washer #5-8 depending on if your application will work with this style washer. Otherwise you should be able to find…

view full answer...

Answer 2

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 3

Hi Glenn; the Draw-Tite 76398 hitch uses M12 X 1.25 X 40mm bolts so that is what you will need to match. We do recommend using lubricant like WD-40 and a wire brush before going this route. That is typically enough to do the trick and get the bolts…

view full answer...

Answer 4

Hey John, sorry for the confusion but we do have hitches that fit you 2025 Mitsubishi Outlander PHEV like with the Curt #C86FV and the EcoHitch part #EH64CR but the etrailer hitch you mentioned does not fit the PHEV models. The Curt is more like a…

view full answer...

Answer 5

You are correct, with that diesel engine you are limited. The best option is going to be the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers item #AL88288. These have a 5,000 lbs load leveling capacity and come with…

view full answer...

Answer 6

Hey Louis, thanks for stopping by! Since the Curt #C13105 and the etrailer #e98837 are basically the same hitch, it also is not going to be compatible with a hanging bike rack. Since this appears to be a trend with these bike racks, then I'd…

view full answer...

Answer 7

When installing the Draw Tite hitch part #76154 that you referenced you have to use the provided hardware that comes with the hitch. I attached a picture of the bolts that come with this hitch as well as an install video link for you to check out as…

view full answer...

Answer 8

The washers that are included with trailer hitch #24819, are conical tooth washers similar to #01292006-020-01. You are correct, they are sort of bowl shaped. The tooth end goes towards the hitch. I have included a link to the installation…

view full answer...

Answer 9

Hey Steve, thanks for reaching out! The correct hitch fitment for your 2025 Hyundai Santa Cruz is the Curt Trailer Hitch Receiver #C23WR. If you let me know what you plan on using the hitch for I'd be more than happy to help you out with any…

view full answer...

Answer 10

Yes, the conical tooth washer needs to be positioned so that the teeth face the hitch. That is what prevents it from coming loose. Take a look at the video I have linked. At about the 1:50 mark the installers start to put the hardware on to mount the…

view full answer...

Answer 11

The linked instructions for your Curt Class III Trailer Hitch #13364 indicate the torque specifications for both the included 10mm and 12mm fasteners. These specs are listed as item 4 in the instructions. For reference I have linked you to an…

view full answer...

Replacement Conical Washer Recommendation for a EAZ-Lift Weight Distribution Hitch

Product Page this Question was Asked From

Continue Researching