Solution For Loose 4/7-way Connector HM40975 with Missing Clip In 2012 Ram 3500
Updated 06/06/2023 | Published 06/04/2023
Question:
Hello! The combo 7/4 trailer plug that I have on the bumper of my truck is loose as it is missing one of the two metal clips that keep it in place. Do you sell these clips loose? Thank you!
asked by: Michael S
0
Expert Reply:
You may be able to DIY something to keep the connector from being loose in the bumper, but you'll need to replace the entire 4/7-way combo connector on your 2012 Ram 3500 with the # HM40975 if you can't figure out a DIY solution, as just the clips are not available by themselves.
expert reply by:
Samuel C
0
Continue Researching
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: How to Measure for Trailer Hitch Drop
- Q&A: 2025 Kia Sportage PHEV
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Q&A: Availability of Victron DC/DC Battery Charger With Lithium Compatibility and Engine On Detection
- Q&A: 7-Way and 4-Way Trailer Wiring Combination for 2015 Ram ProMaster 1500