Can The Andersen Ultimate 5th Wheel Trailer Hitch Be Used To Haul Gooseneck Trailers

Question

Question:

Can I use the gooseneck ball as a regular gooseneck hook up on the Anderson hitches

asked by: Keith R

0

Expert Reply:

The Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter # AM3200 technically could be used to connect to a gooseneck trailer, but the ball would sit much higher than normal gooseneck towing and make the trailer too nose high. If you have base rails the better option would be the Curt Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails # 16085. This would mount into the base rails and give you a gooseneck ball attachment point.

expert reply by: Kevin C

0

Answer 1

Yes, it is Terry! The Andersen Ultimate Connection 5th Wheel Trailer Hitch System item #AN67VR is definitely compatible with B&W Turnover ball systems. You will want to make sure you're using the gooseneck ball that came with the system…

view full answer...

Answer 2

We definitely have a boat winch that is capable of winching your 5,000 lb boat. I recommend the 3,200 lbs Fulton XLT, 2-Speed Trailer Winch part #F142425 which will be more than enough to winch the 5,000 boat trailer as long as you have good rollers…

view full answer...

Answer 3

We can get you set up with a good replacement for your 2,600 lb Fulton winch, but let's start with what you asked in regards to the strap vs. the cable, with the latter being the better choice. A strap is fine but there is a risk of fraying or…

view full answer...

Answer 4

Hey Charlie, I have two options for you. One is a standard 2-5/16" gooseneck hitch ball that is 1" taller item #BWGNXA2050. It measures 4-1/16" tall from the bed of your truck. The other is an offset 2-5/16" gooseneck hitch ball…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

Hey Kris, the Dutton Lainson winch part #DL15440 does not come with a strap so you will need to order one with it. The part #DL24250 will work great with this winch as it is correct width, is 25 feet in length, and has a capacity of 3,700 lb WLL and…

view full answer...

Answer 10

Hey Dave, for a saltwater boat trailer, powder-coated wheels wouldn't be my first choice, but they can still last quite a while if you're good about rinsing them thoroughly after each launch and sealing any chips or cracks in the finish as…

view full answer...

Can The Andersen Ultimate 5th Wheel Trailer Hitch Be Used To Haul Gooseneck Trailers

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching