Will Dexter Straight Tongue Coupler # T4853100 Replace DX20 Actuator?
Updated 05/30/2023 | Published 05/25/2023
Question:
I have a Dexter DX20 surge coupler that I will be changing to electric over hydraulic. I was looking at the Titan straight tongue coupler T4853100 to replace the DX20. Do you know if the bolt patterns will line up or if you have a coupler that will be a direct replacement for the DX20? Thank you
asked by: Jasin Y
Helpful Expert Reply:
Yep!
The farthest mounting holes on the Dexter Straight Tongue Coupler # T4853100 you were looking at are 5" apart as shown in the included diagram, and I was able to find that the DX20 you have uses mounting holes 5" apart as well allowing you to reuse your existing mounting holes.
(click to enlarge)
Product Page this Question was Asked From
Dexter Zinc-Plated Straight-Tongue Coupler - 21,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2-5/16 Inch Ball Coupler
- Bolt-On
- 21000 lbs GTW
- 3 Inch Channel
- Flip Latch
- 5-Bolt
- Marine Grade
- Dexter
more information >
Continue Researching
- Q&A: Comparing Demco Channel Tongue Trailer Couplers # DM16080-95 & # DM15931-95
- Q&A: Will Titan Trailer Coupler T4853100 Bolt In Place of a Model 6 Brake Actuator
- Q&A: Bolt Hole Spacing of Demco DM16080-52 and Titan T4853100 21K Trailer Couplers
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Trailer Coupler Solution that Can Fit 4 inch Wide Channel
- Q&A: Can You Convert 4 Way Plug To Work With Trailer Brakes?
- Q&A: Converting Trailer from Surge Brakes to Electric Brakes
- Q&A: How To Install The Plug-And-Play Hydrastar Vented Marine Electric Over Hydraulic Actuator
- Article: How Does a Trailer Hitch Coupler Work?
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Best Boat Trailer Jacks
- Article: Trailer Wiring Diagrams
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Tell the Weight Rating of a Trailer Axle