Bearing Buddy Bearing Protectors For a Hub Between 2" and 2-1/4"
Updated 04/17/2023 | Published 04/14/2023
Products Featured in This Question
Question:
We need a bearing buddy to fit a 2 1/8 hub. What size would that be? We tried 2441 and 2240 and neither fit.
asked by: Jason
0
Expert Reply:
For the Bearing Buddy we have the following sizes which you will need to verify for your hub.
2.047" # BB2047SS
2.080" # BB2080SS
These are the only Bearing Buddy's we have smaller than the 2.240" # BB2240SS and above 2".
expert reply by:
Bud M
0
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2240SS - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.24 Inch
- 5200 lbs Axle
- Bearing Buddy
more information >
Continue Researching
- Q&A: Is There a Bearing Buddy for a Hub Bore with 2.25 Inch Diameter
- Q&A: Exterior RV Ladder Recommendation for 2003 Coachman Shasta
- Q&A: Baby Moon Hubcaps for 15 Inch Dexstar Wheel
- Q&A: Brake Controller and Harness Recommended for a 2011 Winnebago Vista P26 on Ford F53 Chassis
- Q&A: Trailer Tire Size 215/60-8 vs 205/65-10 on a 2 Place Snowmobile Trailer
- Q&A: Can a 205/60-10 Trailer Tire be Replaced with a 205/65-10 Tire for a Pontoon Boat Trailer
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Lighting Requirements