Can Dexter Brake Actuator # T47457107K Be Used with 2 or 4 Brake Assemblies

Question

Question:

two brakes or 4?

asked by: Robshade

0

Expert Reply:

The Dexter Zinc-Plated Brake Actuator w/ Lockout Shield # T47457107K that you referenced can be used with 2 or 4 brake assemblies.

expert reply by: Jameson C

0

Answer 1

"No Lockout" means that this particular actuator #T47457007K does not have a built-in reverse lockout. Meaning that driving the trailer in reverse will actuate the brakes. You can add a reverse lockout to the actuator by adding a Reverse…

view full answer...

Answer 2

The best option would be to go with Disc Brakes #DE66YR. These are the best option as they repel water better than other trailer brakes and will offer superior braking. This will require the Zinc-Plated Brake Actuator #T47457107K and Brake Line Kit…

view full answer...

Answer 3

Hello Maxim. I do have a video that I think you will find helpful, but we do not have a video showing installation of the exact Dexter Actuator #T47457107K that you mentioned. We do have a video showing installation of a similar bolt-on actuator, the…

view full answer...

Answer 4

Hey James, if you wanted an exact replacement for your Titan Model 60 actuator we have the Dexter Model 60 part #T47457007K which is basically an exact replacement. Dexter bought Titan a while back so essentially Titan and Dexter are the same. The…

view full answer...

Answer 5

Jan, not much trouble at all. You can use the Dexter Zinc-Plated Brake Actuator #T47457007K to replace your Titan Model 60. This actuator has a bolt on design, so you'd just need to unbolt your current one and bolt the new one on.

view full answer...

Answer 6

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 7

Hey Dustin, The Demco Actuator #DM48CV is in fact for disc brakes and we have to get our page updated! Thank you for pointing that out so we can get that fixed haha. Since you're looking for a drum brake application the actuator you are going to…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

Hello Darin, thanks for reaching out. I do have a solution for you. What I recommend is the Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00. This is made for trailers with drum brakes, and it attaches to a 2" ball. It does not come with an…

view full answer...

Answer 10

The hub your Shorelandr boat trailer has is part number 4470400 which is a 3,500 lb axle hub. So for a replacement surge brake assembly you'd want the part #AKUBRK-35 for a set of left and right hand assemblies.

view full answer...

Answer 11

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

view full answer...

Answer 12

Hey Scott! The Dexter DX6.6 Drop-N-Go Brake Actuator #DX79UR is not available with a solenoid since it was designed to be used with free-backing brakes. If you want an electric lockout you will have to add a solenoid #T4748800 to the brake actuator.…

view full answer...

Can Dexter Brake Actuator # T47457107K Be Used with 2 or 4 Brake Assemblies

Product Page this Question was Asked From

Continue Researching