How To Find Reverse Light Wire on 2022 Ford Bronco for 4 to 5-Way Adapter
Updated 03/22/2023 | Published 03/21/2023
Question:
Can you help to Identify the reverse wire on a 2022 Ford Bronco to install a a 4 pin to 5 pin Adapter.
asked by: Michael R
Expert Reply:
In order to find the correct reverse light wire on a 2022 Ford Bronco for installing the Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter part # 20036 you'll need to remove the tail light and start testing each of the wires going to the light until you might the one that only has power with the vehicle in reverse. Please note, you will need someone inside the vehicle while you test at the rear so make sure to observe any safety precautions such as having the parking brake set while testing.
Unfortunately, we don't have access to vehicle wiring diagrams.
Continue Researching
- Q&A: Can a 4-Way Trailer Connector be Plugged Into a 5-Way Vehicle End Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Q&A: Wiring New 4-Way Connector on Trailer with 5 Wires
- Article: Trailer Wiring Diagrams
- Q&A: New Brake Assemblies, Hub/Drums, Brake Lines, and Bearing Buddy for Trailer with 3,500 lb Axle
- Q&A: How to Identify Correct Replacement Bearings and Seals for Boat Trailer
- Q&A: Recommended Disc Brake Conversion Kit for 5200-lbs Lippert Axles with 6 on 5-1/2 Bolt Pattern
- Q&A: Where To Attach Blue Wire From 5 Wires on Trailer When Installing a 7-Way Connector
- Q&A: Can a 5-Way Adapter Work with a Trailer 4-Way Connector
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)