How to Determine the Correct Replacement Support Arm Assembly for Solera RV Awning

Question

Question:

Will this work on grand design imagin 2020

asked by: Sandra R

0

Expert Reply:

In order to determine if the Replacement Support Arm Assembly for Solera Flat RV Awnings # LC281154 will work with your 2020 Grand Design Imagine, you will just need to measure the length of the wall-mount extrusion from top to bottom as shown below.

Once you have the measurement on-hand you can choose the correct support arm assembly or you can let me know and I'd be happy to find it for you.

expert reply by: Bryce D

0

Measuring for Replacement
(click to enlarge)

Answer 1

I checked with Lippert and asked if we could get just the part number you mentioned and they told me it's not available by itself. You'd need the entire assembly part #LC281154.

view full answer...

Answer 2

I recommend using the Alpha Systems Butyl Tape for RV Weatherproofing #AL62FJ to install the Solera Electric RV Awning Conversion Kit w/ Speakers #LC351396. This tape measures 30' x 1-1/2" x 1/8" so you'll be able to have plenty of…

view full answer...

Answer 3

While we don't have a way of knowing what awning you have, I can tell you how to choose the right replacement support arms, so long as your awning is a Solera awning. To do so, all you have to do is measure the length of the wall mount, which…

view full answer...

Answer 4

The best way to find the correct replacement awning arm would be to measure the length of the existing and note the color. The Solera Short Awning Support Arm part #LC97UD for example measures 63" end to end and is white in color. If this does…

view full answer...

Answer 5

Good question, and the difference between the standard Solera 12V Power RV Awning Conversion Kit #LC434724 (White) or #LC434723 (Black) and the Solera Smart Arm 12V Power RV Awning Conversion Kit #LC759405 (White) or #LC759517 (Black) is the…

view full answer...

Answer 6

Based on the pictures you definitely need the awning support arm #LC281154. I can't tell in that other photo if the pin is bent or damaged, or just barely hanging in there. I'm also not sure if your idler head and roller endcap are ok or not…

view full answer...

Answer 7

Hi Jesus, The number you provided comes back as a Solera Edge awning in black, but we'll need a bit more information to determine the correct arm because there's 3 different models in black. There should be another sticker on the arm with a…

view full answer...

Answer 8

Thank you for providing your part number Steve. I was able to verify you will need the Replacement Idler Arm Assembly #LC75AF. We also have the Replacement Drive Arm Assembly #LC85AF.

view full answer...

Answer 9

Hey Zach, we have entire replacement arms for the Lippert 2000 series awnings, so you just need to choose between the Drive Arm #LC85AF, and the Idler Arm #LC75AF. The idler arm is the one that doesn't have the motor whereas the drive arm has the…

view full answer...

Answer 10

Hello Paul, thanks for reaching out. I do have a potential solution for you but we do not carry a direct replacement for the Solera 3000 series awning arms, so that is not something we can offer. What we can offer would be a an arm kit that replaces…

view full answer...

Answer 11

Yes, the Replacement Short Arm Assembly for RV Awnings part #LC404523 is correct for a Solera V000436372 Awning.

view full answer...

Answer 12

Since your Solera arm is 58 inches long that would indicate it's a Solera Edge awning which means for a replacement drive arm you would want the part #LC22ED or for a replacement idler arm part #LC62ED.

view full answer...

How to Determine the Correct Replacement Support Arm Assembly for Solera RV Awning

Product Page this Question was Asked From

Continue Researching