Does the Entire Speaker Head Cover Need to be Removed to Install the Replacement Front Cover?

Question

Question:

How does the cover pop off to replace with this cover. Does the whole box have to come off to replace it?

asked by: Travis

0

Expert Reply:

It's actually pretty easy to remove the Replacement Speaker Idler Head Front Cover for Solera Power RV Awnings # LC731464.

The whole box does not need to be removed, all you need to do is remove the screws that hold the front cover to the back cover. There should be two screws that hold the front to the back which is shown below.

expert reply by: Bryce D

0

Screw Locations
(click to enlarge)

Answer 1

Hey Tom, when the Thomas Payne Trifold RV Loveseat and Sleeper with Cupholders #LC62PX is in the folded out bed position it's overall front to back would be 81 inches. Would that be enough room in your RV?

view full answer...

Answer 2

Most likely the issue is wiring like you mentioned if the one side just stopped working one day. You can remove the cover and you'll see that the speaker is attached to it and there would be two spade connectors from the speaker to the wiring.…

view full answer...

Answer 3

I spoke to my contact at Lippert and he told me the Replacement Cover for Solera Awnings - Idler Head - Front Cover - Black #LC643923 would be the correct replacement cover for your power awnings. If you need the motor side cover, that will be the…

view full answer...

Answer 4

Hey there Layla! There are a few different forms of weight distribution hitches, but the majority of the systems that have sway control use friction bars, which work similar to brake pads on your vehicle. This works really well, but it can sometimes…

view full answer...

Answer 5

There are two different styles of awning head covers, the older style which had the LCI logo on the front cover and the new regal style which does not have the LCI logo on the front cover. If you have the new style then you will want to use part…

view full answer...

Answer 6

Hi G, Are you referring to the head cover? If so, we offer the following replacement options: Drive Heads (right side): Black - Regal #LC643922 Black - Plain #LC289560 Black - Regal - Speaker #LC731463 Black - Plain - Speaker #LC354185 White - Regal…

view full answer...

Answer 7

Hey Clarence! That would be great but none of the trailer camera systems are going to pair with vehicle monitors/screens. All of them will require a separate monitor. The Furrion is a really nice system so I do recommend it. Since the Vision S is…

view full answer...

Answer 8

I reached out to my contact at Lippert and the correct replacement back cover compatible with the Replacement Cover for Solera Regal Power Awning Speaker Idler Head - Front - Black #LC731464 you were looking at is the Replacement Cover for Solera…

view full answer...

Does the Entire Speaker Head Cover Need to be Removed to Install the Replacement Front Cover?

Product Page this Question was Asked From

Continue Researching