Parts Needed to Flat Tow 2021 Jeep Cherokee Latitude with Demco Tow Bar

Published 03/08/2023

Products Featured in This Question

etrailer Invisible Base Plate Kit - Removable Arms

(751)

$473.26

Blue Ox Patriot Portable Flat Tow Brake System - Proportional

(485)

$1406.81

Demco Tabless Base Plate Kit - Removable Arms

(414)

$531.05

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3406)

$160.90

Question:

We have an older Demco model # 9511006 Tow Bar and a 2021 Jeep Cherokee Latitude we want to tow behind our motorhome. We only have the tow bar. What else do we need? Thank you.

asked by: Mary L

Expert Reply:

Since you have a 2021 Jeep Cherokee and a Demco tow bar the correct base plate kit you'd need is the part # DM9519338 which is a fit for your vehicle and also compatible with the Demco tow bar that you have as well.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.