Replacement Slipper Spring for 1986 Coleman Sequoia
Question:
Thank you for asking the following question: 1986 Coleman sequoia that needs a new leaf spring. The current spring is 27” length with a bent end and 1 3/4 wide. I believe the axle is a 2000lbs rating. What options do I have? Thank you
asked by: Darius
0
Expert Reply:
The best option we have is the trailer leaf spring part # e49SR which is for a 2,900 lb trailer axle and has an overall length of 30 inches and is 1-3/4 inches wide. This might be a little longer than what you have now but since it has a straight end and not a curved end that shouldn't be an issue.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- Flat End
- 2900 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 30 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Shop: 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles - 30" Long
- Video: Review of etrailer 3 Leaf Slipper Spring - e49SR
- Article: Best Boat Trailer Jacks
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Where Should End of Slipper Spring Sit On Hanger on Single Axle Trailer
- Search Results: nylon bushing
- Search Results: leaf spring
- Search Results: spring bushings
- Search Results: nylon bushings
- Shop: Nylon Bushing - 9/16" Inner Diameter, 1.024" Outer Diameter - 1-3/4" Long
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: etrailer Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1,000 lbs
- Q&A: Replacement Leaf Springs and U-Bolts For Karavan 1,000LB Single Square Axle Boat Trailer
- Q&A: Replacing Leaf Springs On Trailer To A Lower Capacity To Avoid Road Shock
- Q&A: Trailer Axle Weight Rating for 2 Inch Square Axle
- Search Results: seal
- Search Results: hub
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Shop: 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Video: Review of etrailer 4 Leaf Slipper Spring - e89SR
- Q&A: What Distance is Needed Between Trailer Axle and Trailer Frame
- Q&A: What is Recommended Clearance between Trailer Axle and Frame
- Article: How to Measure a Trailer Axle
- Video: Review of Universal Group Trailer Leaf Spring Suspension - Springs - SP-230275
- Video: Redline Round Trailer Axle U-Bolt Mounting Kit Review
- Video: Performance Tool Carbon Fiber Digital Caliper Review
- Search Results: camper
- Video: Review of Timbren Trailer Suspension Springs - TSR4000T02
- Article: Where to Position the Trailer Axle?