Recommended Kayak Carrier for Rhino-Rack Crossbars on 2022 Ram 2500 Truck Bed

Question

Question:

can you add the bike carrier and a kayak carrier to these crossbars over the tonneau cover? if so any suggestions? thanks

asked by: Jay

0

Expert Reply:

The Rhino-Rack # RRVA180B-RRRLT600 has 71" crossbars so you will have plenty of room to add a kayak carrier with the Yakima HighRoad Roof Bike Rack # Y22DJ.

The Rhino-Rack Kayak Roof Rack # S512-S512X you looked at would be a great choice, especially if you want to carry 2 kayaks. A J-style carrier will maximize your space, and if you're only carrying one you can remove the extension arms. However, if you only have 1 kayak the # S510 would be a better choice.

Depending on the kayak and your bed length, you may also want to consider adding the Malone Axis Truck Bed and Roof Load Extender # MPG907. This will help keep the kayaks stable if they're hanging out over the back of the truck.

expert reply by: Robin H

0

Answer 1

There is no reason why you couldn't install a front mount hitch and and add a front load bar to help support your Kayak and create more clearance between it and your travel trailer. The front mount hitch I recommend for your 2007 Toyota Sequoia…

view full answer...

Answer 2

To add a roller to the Malone Axis Truck Bed and Roof Load Extender for 2" Hitches #MPG907 you need the part #MAL97AR which comes with the roller and the mounting hardware to install it.

view full answer...

Answer 3

I had to do some digging, but I believe you're looking for the Rhino-Rack Multi Axle Adapter for Fork Mount Bike Racks #RRRBCA030. This will replace the 9MM quick release skewer that's on the Rhino-Rack Road Warrior Rooftop Bike Carrier -…

view full answer...

Answer 4

I would be happy to help you. The RetraxPRO XR Hard Tonneau Cover item #RTT-80384 is the correct tonneau cover for the 8 foot bed model 2022 Ford F-350. I recommend the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers…

view full answer...

Answer 5

What I would do is go out to your truck and measure out 71 inches and 65 inches on a tape measure and compare that to the width of your bed. If you think the 71 inch looks better and would suit your needs then that's what you would want to go…

view full answer...

Answer 6

I did see the review saying they used spacers for the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - 71" Long #RRVA180B-RRRLT600. This system will be approximately 4-1/4" to the top of the…

view full answer...

Answer 7

The 71" Rhino-Rack Vortex Crossbars for Retrax XR Tonneau Covers item #RRVA180B-RRRLT600 are the correct set for your 2022 Ram 3500. These are made for full size trucks and fit in the rails of the Retrax PRO XR. These crossbars are exactly…

view full answer...

Answer 8

Sounds like you have a 2004 through 2007 Ford F-150 with a 6-1/2 foot bed that you are wanting to install a tonneau cover and crossbars above the bed on. I have a great solution for that but we don't have a way to do that with a Truxedo Sentry…

view full answer...

Answer 9

The Thule ProBar Evo Crossbars #TH713700 could certainly work, but you have other options and I wouldn't really recommend them. Instead, I would go with the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers…

view full answer...

Answer 10

Thanks for reaching out about the Rhino-Rack Kit #RRVA180B-RRRLT600, Eric! The rubber strips will go into the top channel while the plastic pieces with measurements will go in the bottom channel. The strips have the measurements on them so it's…

view full answer...

Answer 11

Yes, the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers are compatible with a Roll-N-Lock Tonneau Cover that have the MaxTrak System. The tracks are the same as the ones on other tonneau covers so there will be no…

view full answer...

Answer 12

Thanks for the photo, and yes, the LockNLoad will indeed fit to Rhino-Rack Vortex aero crossbars like your Rhino-Rack Vortex Crossbars for Retrax XR #RRVA180B-RRRLT600. You'll just need adapters to mount the platform, and here are the part…

view full answer...

Recommended Kayak Carrier for Rhino-Rack Crossbars on 2022 Ram 2500 Truck Bed

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching