Recommended Towing Setup for a 2022 Chrysler Pacifica Hyrbid

Question

Question:

Does this hitch fit my 2022 Chrysler Pacifica hybrid?

asked by: Mike P

0

Expert Reply:

Yes, the Curt Trailer Hitch Receiver # C29UR does fit your 2022 Chrysler Pacifica Hybrid. This trailer hitch has a maximum towing capacity of 4,000-lbs, a maximum tongue weight of 400-lbs, and is assembled in the USA.

To complete your towing setup you're going to also need a wiring kit, T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK96FR as well as a ball mount like the Curt Ball Mount for 2" Hitches # C45030.

expert reply by: Bryce D

0

Answer 1

That is correct. To install the Curt Trailer Hitch Receiver #C29UR on your 2018 Chrysler Pacifica Hybrid you will need to remove two the exhaust hangers from the rubber isolators, and support the exhaust to make sure it does not get damaged. Next you…

view full answer...

Answer 2

The Curt hitch part #C29UR that fits the 2018 Chrysler Pacifica does not have any additional steps required to install beyond what's mentioned in the detailed instructions link attached to this page. The other fit part #C65CR that's for the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

Answer 7

Hello Hal, Congrats on the new ride! What is your favorite new feature? With any aftermarket hitch there is the possibility that the hands free tailgate sensor will be covered. So if you install B&W Trailer Hitch Receiver - Custom Fit - Class III…

view full answer...

Recommended Towing Setup for a 2022 Chrysler Pacifica Hyrbid

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching