Parts Needed to Flat Tow 2021 Jeep Grand Cherokee

Published 10/17/2022

Products Featured in This Question

etrailer Invisible Base Plate Kit - Removable Arms

(608)

$505.97

Blue Ox Patriot Portable Flat Tow Brake System - Proportional

(368)

$1602.80

etrailer SD Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(290)

$819.66

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3104)

$156.17

Question:

I am looking for the right set up to tow my 2021 Jeep grand Cherokee behind my motorhome? not sure what set up to go with.

asked by: Robert R

Expert Reply:

The first thing you need is base plate kit which for that we have the etrailer kit part # e98950 that is a confirmed fit and easy to connect/disconnect from. Then for a non-binding tow bar that work great with this base plate you'd want the etrailer SD tow bar part # e34ZR.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.