Replacement 15A inline fuse for Tekonsha trailer wiring harness

Question

Question:

I bought a wiring kit for my 2017 Audi. I ran the power wire to my battery but I don’t have the circuit protected module with the fuse in it. It’s the pink one in the video. I am wondering if there is a way to purchase just one of these with one heat shrink wrap connector. The whole system is installed and ready to go I just need this to attach it to the battery

asked by: Mitchell D

0

Expert Reply:

The ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT comes with the inline fuse that you are referring to. If you don't have it, then you can go with Spectro 14-Gauge ATO-ATC Fuse Holder # SWC9538 along with the compatible Curt 15-Amp Blade Fuse # C58450-1. For the butt connector, # DW05714 would work well; this is sold in a quantity of 1. If you want shrink wrap butt connectors, then you will need to purchase a pack of 10 # DW05744-10.

I don't see that you purchased this kit from us, but if you bought the kit brand new then you could try to contact that vendor to get the inline fuse sent to you. However, the part is very cheap and easy to install as you can see. I hope this helps!

expert reply by: Andrew N

0

Tekonsha trailer wiring 15a inline fuse
(click to enlarge)

Answer 1

For your 12V wiring to your 7-way, we have people running many different things off that 12V wire. 12 gauge or even better 10 gauge ensures that the power is transferred timely and accurately. We have a kit for brake controllers and 12V wiring for…

view full answer...

Answer 2

Yes there will be a fuse that protects the 12 volt trailer accessory circuit of your 7-way wiring. If this is factory wiring of a truck you'll want to check out the fuse box diagram or the owners manual.

view full answer...

Answer 3

If you are installing a 7-way and brake controller you will want to use a circuit breaker in-line when connecting the Black wire from the 7-way to the battery and in-line from the brake controller to the battery. The Black wire will draw 12 volt…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Michael, Curt hitches are generally my favorite hitch to recommend as in our experience we have found them to just have the tightest quality control and they are also made in the USA. We have year of experience with them to back that up so I…

view full answer...

Answer 6

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

view full answer...

Replacement 15A inline fuse for Tekonsha trailer wiring harness

Products Featured in This Question

Continue Researching