Bolt Pattern on Hub and Rotor Side of Replacement Rotor Spacers for Kodiak 12K Disc Brake Kit

Question

Question:

I would like to know what the bolt pattern is on the smaller circle and on the larger circle of this spacer.

asked by: Mauricio

0

Expert Reply:

The bolt pattern on the rotor side of the # KOD74FR is 8 on 6-1/2. The bolt pattern on the hub side is 8 on 7-1/2.

expert reply by: Robin H

0

Answer 1

Thanks for reaching out! Normally we do recommend a sliding 5th wheel hitch like the B&W Companion #BWRVK3670 for a short bed truck but since you have the RamBoxes on your 2017 Ram 2500 we need to prevent the body of the pin box from moving so it…

view full answer...

Answer 2

The bolts that come with the Fulton F2 winch part #FW16000101 that you referenced are 3/8 inch diameter Grade 5 bolts. I also attached a review video link for this winch for you to check out as well.

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Bolt Pattern on Hub and Rotor Side of Replacement Rotor Spacers for Kodiak 12K Disc Brake Kit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching