Troubleshooting Active Running Light Trailer Wiring Circuit on 2019 Kia Soul Wiring
Published 06/29/2022 >
Products Featured in This Question
Question:
This is a follow-up to your reply. The brown wire leading from my LED taillight to the Curt module is hot when the headlights are on. But after the Curt module leading to the trailer wiring harness, the brown wire shows no power when tested with a circuit tester. Interestingly, when a flat-pin harness tester is connected as shown in my first posting, the brown wire running lights circuit is illuminated on the harness tester. That seems weird, as the post-module brown wire shows no power! Maybe theres just enough power coming through the brown wire to illuminate the small green light on the flat-pin tester. I suspect the Curt module is the issue. Would you concur, or am I failing to understand this issue? Thanks
asked by: Dave
Expert Reply:
If the lights on your tester, like the Brophy # F5CT, are lighting up properly then it sounds like your Curt Wiring Kit # C56220 is working just fine on your 2019 Kia Soul. When you start applying another circuit tester like part # PTW2993 it is dimming the lights because that power is being sent through the tester instead of "stopping" in the tester.
The running lights shouldn't be on unless the headlights are active on your vehicle. I would try hooking up your trailer to see if the running lights actually come on when the larger trailer circuit is connected instead of the smaller tester like what you have.
If the running lights on the trailer turn on then you'll want to test the brown wire going into the Curt T-Connector. If this is always hot then that means the running light circuit on your Kia Soul is hot and the module is just sending power to the 4-Way as it's supposed to. If the brown wire going into the module isn't hot then that means the module is sending power to the running light circuit on it's own and you'll want to get it replaced under warranty to avoid further issues. You might consider switching over to the T-One Wiring Kit # 118637 instead because we've found the Tekonsha brand to be a bit more reliable when it comes to the wiring.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Visible
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What Do You Need To Measure To Find The Correct Replacement Slide Out Gear Pack
- Q&A: Troubleshooting The Curt T-Connector Wiring Harness On A 2012 Kia Soul
- Q&A: Replacing Factory Trailer Hitch to Install TorkLift SuperHitch Magnum Hitch on 2019 Ram 3500
- Q&A: Recommended Wiring Harness for a 2018 Kia Soul w/ LED Tail lights
- Q&A: Comparing The Curt # C99DR And Tekonsha # TK32VR Trailer Wiring Harness For A 2025 Kia Sportage
- Q&A: What Trailer Wiring do I Need to Put a 4 Flat on the Back of My 2025 Hyundai Tucson?
- Q&A: How to Tow Kia Soul with Automatic Transmission
- Article: How to Measure for Trailer Hitch Drop





Dave
6/29/2022
This is a follow-up to your reply. The brown wire leading from my LED taillight to the Curt module is hot when the headlights are on. But after the Curt module leading to the trailer wiring harness, the brown wire shows no power when tested with a circuit tester. Interestingly, when a flat-pin harness tester is connected as shown in my first posting, the brown wire running lights circuit is illuminated on the harness tester. That seems weird, as the post-module brown wire shows no power! Maybe theres just enough power coming through the brown wire to illuminate the small green light on the flat-pin tester. I suspect the Curt module is the issue. Would you concur, or am I failing to understand this issue? Thanks