Replacement Glass Turntable Plate For A Greystone EM925RSL-B Microwave

Question

Question:

microwave plate for high pointe model em925rsl=b

asked by: Walt J

0

Expert Reply:

The Replacement Glass Turntable Plate for Greystone Built-in Microwave # 324-GLASSPLATE should work just fine with your Greystone EM925RSL-B microwave.

I went ahead and looked up the size of the original glass turntable plate for your microwave, and they both measure the same 10-1/2" in diameter, so you shouldn't have any issues.

I have also included a product overview video for you to check out as well.

expert reply by: Bryce D

0

Answer 1

The closest option we carry to your current model is the High Pointe Standard RV Microwave - 900 Watts - 1 Cu Ft #HP59ZR. This model is 19-1/8" wide x 11-1/2" tall x 14-13/16" deep and comes with a trim kit that's 20.75” wide x 15”…

view full answer...

Answer 2

Do you by any chance mean 235/80-16 and 235/85-16? Because there isn't a 275 trailer tire size that I have seen. If so then the widths are the same between the two 235 sizes. The difference is overall diameter. The 235/80-16 is 30.9 inches in…

view full answer...

Answer 3

Yes, the High Pointe Direct Replacement EM925AQR, which is part #HP59ZR on our site, will replace your existing microwave High Point model number EM925RYS.

view full answer...

Answer 4

Hello, I verified with the manufacturer that the Replacement Turntable Ring for Greystone Built-in Microwave, #324-TURNTABLERING is a diameter of 7-1/2" and designed to work with the Replacement Glass Turntable Plate for Greystone Built-in…

view full answer...

Answer 5

while yes the Replacement Door Switch for Lippert Electric Coach Step, #LC301694 that you refer to can possibly be made to work another brand, I highly recommend you identify what steps you have so we can provide the best option in replacement part.

view full answer...

Answer 6

In order to choose the correct replacement magnetic door switch for a set of Kwikee steps you'll need to know what controller you have as well as the shape and color of the existing door switch. I have attached a few photos which go into detail…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Replacement Glass Turntable Plate For A Greystone EM925RSL-B Microwave

Featured Help Information

Miscellaneous Media

Continue Researching