Retracted Height of Torklift GlowSteps TLA8102 and TLA8103

Question

Question:

Hello, I was wondering if you new the height of the 2 step torklift revolution steps TLA8102 and the TLA8103 when they are retracted? Thanks,

asked by: Brian W

0

Expert Reply:

The TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8102 have a height of 16-1/2" from the top of the mounting bracket to the bottom of the steps when fully retracted. This is the same for the # TLA8103 since they both use the same housing for the retracted steps.

expert reply by: Jameson C

0

Answer 1

Thanks for reaching out, Edith! Yes, the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear #TLA8102 are exactly what you need for your 2021 Lance 1995 according to the specs you gave me.

view full answer...

Answer 2

Hey Max, For 27" width and 28" entry height you would need the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear #TLA8103. This model has 25-1/2" wide x 13-7/8" deep mounting brackets so you'll want to make sure you…

view full answer...

Answer 3

The TorkLift GlowStep Revolution Scissor Steps #TLA8004 that you referenced are designed to fit entry heights on RVs that are between 32-1/2 and 44 inches which which might be a little higher than what you have on your 2018 Lance 1475 based on the…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…

view full answer...

Answer 6

Hey Steve! The Big Truck Big RV Trailer Jack Foot Scale #BTBRV014 does not include the SnapPad. If you want to install one on your scale for additional ground contact and stability you will need to order the SnapPad Jack Stand Pad #SN47FR separately.…

view full answer...

Answer 7

I spoke to my contact at Torklift and he informed me that the left to right width of the mounting bracket of the Torklift Glowstep Revolutions like the part #TLA8003 is 27-1/2 inches and the front to back depth is 12 inches. All of the Torklift steps…

view full answer...

Answer 8

Hello John, First off, I apologize for the delay in getting back to you. We had quite the spike in questions come through, and are getting caught up. You are correct that the 3-step TorkLift GlowStep Stow N' Go with Landing Gear #TLA7833 is…

view full answer...

Answer 9

While we do have some step solutions for you, none of the traditional style steps have the top step level with the mounting brackets when they are pulled out and/or a bracket mounting width of 29" wide (which is much wider than normal). For your…

view full answer...

Answer 10

The TorkLift Glow Step Revolution #TLA8102 are designed to work as a universal replacement option, and won't be coach specific. Additionally, we do not have information that tells us what steps fit on different coaches, so you will want to…

view full answer...

Answer 11

The install and removal of the step portion of the GlowSteps part #TLA7802 is pretty easy and does not require the use of any tools. Basically you just pull out cotter pin and then slide the pin out and you can remove the steps from the bracket. No…

view full answer...

Retracted Height of Torklift GlowSteps TLA8102 and TLA8103

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching