Brake Mounting Bolt For 12-1/4" Brake Assemblies With 10K-15K Capacity
Updated 04/18/2022 | Published 04/16/2022
Products Featured in This Question
Question:
Does this bolt connect the brake line to the caliber?
asked by: Demarcus
0
Expert Reply:
The Brake Mounting Bolt for 10K, 12K & 15K Brakes # 7-116 is the bolt that connects the part of the caliper called the bracket, and hold it tight to the spindle or steering knuckle.
What it sounds like you're needing is the banjo bolt which connect the brake line to the caliper., however the only banjo bolt we carry is the Banjo Bolt for Titan Disc Brake Caliper # T7775, which connects to the Titan 90-degree hydraulic fittings with 3/8"-24 UNF.
expert reply by:
Bryce D
0
Product Page this Question was Asked From
Brake Mounting Bolt for 10K, 12K & 15K Brakes
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- 10000 - 15000 lbs
- Hardware
- Bolts
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Parts Available for the RAM Trailer Jack Part # TJD-7000S
- Q&A: Replacement Disc Brake Rotor for Dexter 10K/12K Axle
- Q&A: How to Install Replacement 11" Rotor for Dexter 10K or 12K Disc Brakes
- Q&A: Do You Need To Remove The Hub From A Trailer Brake Assembly To Replace The Rotor?
- Q&A: How to Measure for Offset on Trailer Wheel
- Article: What Do I Need To Tow A Trailer?
- Q&A: Can Bulldog 182425 be Used Instead of Bulldog 183401 for Electric Horse Trailer Jack
- Q&A: How To Install the Spindle Nut on a 12,000 Pound Dexter Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Article: Trailer Hitch Installation Tips
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups