Will Aluminum Hi-Spec Trailer Wheel Fit Hub With Zerk Fitting
Updated 03/21/2022 | Published 03/18/2022
Question:
My existing trailer hubs have bearing buddy type zerk fittings for greasing the bearings. will this work with those?
asked by: Phil L
1
Helpful Expert Reply:
Assuming you have a 6 on 5-1/2 bolt pattern the Aluminum Hi-Spec Series 6 Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black # AM22652B will not have a problem fitting on your hubs. The center cap will need to be removed when you add grease but this can be done easily since it is held in place with a single screw.
expert reply by:
Robin H
1
Product Page this Question was Asked From
Aluminum Hi-Spec Series 6 Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black
- Trailer Tires and Wheels
- Wheel Only
- 15 Inch
- 6 on 5-1/2 Inch
- Aluminum Wheels
- HWT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Will ST205/75R15 Tires Fit 15 x 6 Aluminum Hi-Spec Series 6 Trailer Wheel
- Q&A: Should Leaf of Trailer Leaf Spring be Removed to Lower Capacity
- Q&A: Replacement Leaf Springs for 2022 Grand Design Solitude With 7k Axles
- Q&A: How to Pick Out Replacement Wheels Tires for a Featherlite Trailer
- Q&A: What Is The Recommended Lug Nut Torque On 7,000lb Axles?
- Q&A: What is the Highest Weight Rating for a 15" Trailer Wheel for a 14,000 lb Trailer
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)