Titan Coupler to Replace Ram 5k Coupler
Updated 03/02/2022 | Published 02/28/2022
Products Featured in This Question
Question:
I have a RAM 5k 3 inch channel 2 inch ball class 3 coupler currently. It is pretty rusty and I am looking to replace it. I am running into an issue. The mounting holes on my current coupler are lower than the standard. Do you offer a coupler with lower mounting holes?
asked by: Jacob M
Expert Reply:
I did some research online and I found a coupler with some lower mounting holes that looks similar to the Ram's. It is the Titan Coupler - Painted - Multi-Fit Ball - 3" Channel - Bolt On - 5,000 lbs item # T2343400. I have attached a diagram I made of the spacing and location of the bolt holes.
(click to enlarge)
Product Page this Question was Asked From
Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 1-7/8" Ball - Bolt On - 2,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 1-7/8 Inch Ball Coupler
- Bolt-On
- 2000 lbs GTW
- 3 Inch Channel
- Trigger Latch
- 2-Bolt
- Marine Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Hopkins HM40975-11998 Trailer Connector - What Is The White Wire For?
- Q&A: Availability of a Trailer Coupler that Fits a 3-1/2 Inch Wide Tongue
- Q&A: Does the Hopkins 4-Way Flat to 7-Blade Plug-In Trailer Connector Adapter Have a Mounting Bracket?
- Q&A: Should Titan Model 10 Surge Brake Actuator Be Locked Out Or Replaced For EOH Brakes?
- Q&A: Looking For 4.80-12 Tires That Have A Speed Rating Higher Than 55 mph
- Q&A: Lug Nut Torque for a Trailer Wheel
- Q&A: Replacement Coupler For Boat Trailer Bolt On Surge Coupler Switched to Electric Actuated Brakes
- Article: Trailer Lighting Requirements
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Most Popular Wheel Bearings
- Article: What Do I Need To Tow A Trailer?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Types of Bumpers
- Article: Hand Winches