bing tracking image
Q & A Icon

Water Resistant Momentary Switch  

Updated 02/23/2022 | Published 02/22/2022

Question:

i am looking for a momentary switch to power up a 36-volt battery voltage indicator. LED small LED voltage indicator. To touch momentarily and see where the voltage is on my 3 batteries for trolling motor which will be mounted in dash but will get wet rain ,splash ,ect

0

Expert Reply:

I do have an option for you, but the Mini-Momentary 12V Switch # 37212815 is not water resistant or water proof. For a switch that is water resistant, you can use the Single Momentary Switch # 37213845. The Single Momentary Switch # 37213845 will have a 3 pin design opposed to a 2 pin design. You will simply wire the middle pin and then either the top or bottom pin depending on how you would like the switch to operate.

If you want the switch to operate when you press the switch up, then you would wire the top pin. If you wanted the switch to operate when you pressed the switch down, then you would wire the bottom pin instead.

expert reply by:
0
Scott S

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>