What Remote Works with the Bulldog Winch # BDW76FR?  

My contact at Bulldog Winch confirmed that the 3/8-inch sling hook on their part #BDW20118 has a pin that can be tapped out with a punch and a light tap from a hammer. I went to our warehouse and measured this item and found that the clevis opening…

The ComeUp DV-6s Off-Road Winch #CU854754 referenced in your question actually features a 3-pin plug. With this in mind the correct wireless remote will be the 3-Pin part #CU880609. I verified this with my contact at ComeUp. At this time the DV-6s…

Hey Eric, I recommend going with the Bulldog Winch Trailer Winch #BDW66FR. This winch has a static line load of 9,800 lbs, has a line speed of 29 FPM, and has a free spooling clutch with a 360 degree gearbox that can be rotated so you can reach the…

The Curt Front Hitch for the 2008 FJ Cruiser , item #31367, and the setup you are describing should work well, as long as the multi mount you are referring to is designed to fit into a 2 inch receiver. If you already have the winch but not the hitch…

Sure, you can definitely use the Curt Front Mount Trailer Hitch Receiver, part #31367, to mount a winch on the front of your 2008 Toyota FJ. Just keep in mind the weight capacities of the hitch and winch in comparison with the weights you will be…

I was able to have the ComeUp Battery Isolation Switch for DV and Seal Series Winches part #CU881097 pulled from our warehouse and measured just for you. The following is what we were able to obtain. The overall depth when the t-handle is ON is 3…

The Superwinch S7500 Trailer Winch #SW1475201 is designed to have more of a "universal" style for mounting and may require some adaption for installation because it does not have a typical mounting pattern. The Superwinch S7500 Trailer…

The Bulldog Winch Trailer Winch #BDW10039 is 24" long x 7-1/4" wide x 7-1/4" tall so it will have no issues fitting on your recessed plate on your trailer. The winch includes a mounting plate that is 20" long and 7-3/8" wide.…

I recommend the Bulldog Winch Winch Cover - Standard Truck Winches #BDW20046, It has a stretchy elastic bottom, and polyurethane interior coating. It is a quick and easy install or removal.