Replacement Awning Tube for 20 Foot Solara RV Awning

Question

Question:

My customers Solera awning has a bent tube. The awning measurement is 20’ from center to center of the awning arms. I need the correct tube in black. The description is confusing. Thanks

asked by: Patrick N

0

Expert Reply:

I've checked with Lippert, who tells me that you'd need to measure the length of the actual tube itself, rather than the center arm to center arm length. Given the length you measured, the # LC33FR you'd looked at would be the likely replacement.

expert reply by: Mike L

0

Customer Submitted Photo
(click to enlarge)

Answer 1

The distance between the left and right support arm brackets for the Solera Smart Arm 12V Power RV Awning part #LC405523 is exactly 20' on center. I have attached a photo for you that shows how the awning width is measured. The actual fabric is…

view full answer...

Answer 2

The inner diameter of Solera roller tubes like the Replacement 20' Roller Tube for Solera RV Awnings #LC33FR is 3", that being said Solera and other branded awnings are not compatible with each other. We typically have a lot of people…

view full answer...

Answer 3

We do offer a hinge that may work well for you. I recommend part #PLR1904-Z. This is a barn door hinge for dump trucks and is made of 1/4 inch steel. This has a smooth surface that is designed for welding. I have also attached a photo of this hinge…

view full answer...

Answer 4

Hi Bart, The correct replacement for your 130-1146 slide-out motor is the Replacement Gear Motor Assembly for Lippert Electric Slide-Out #LC386327.

view full answer...

Answer 5

Yes, the Solera Rollbar #LC89UD will replace your roll bar with awning arms 20' across on center. This particular roll bar is gray in color. We also have it in Black #LC33FR if you need that color. Both will fit either manual or power awnings.

view full answer...

Answer 6

Hey Ken! The Replacement 19'1" Fabric for 20' RV Awning - Universal - Solid Black #LCV000334439 is solid black on both the top and the underside/bottom. If you need anything else feel free to reach out in the comments below.

view full answer...

Answer 7

We carry a variety of roller tube and awning fabric kits without the awning arms, but I'll need to know the size that you currently need. To measure for this you'll want to measure from the center of one awning arm to the center of the other…

view full answer...

Answer 8

Hi Karen, What are the dimensions of the space available for the fridge? If it's pretty tight the only open we currently have would be the the same fridge #324-000119 (23-1/2"W x 25-3/4"D x 59-3/4"T), but if you have a bit more…

view full answer...

Answer 9

We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches and…

view full answer...

Answer 10

Since you said you can use a Solera awning tube and yours is 19 foot 6 inches long the correct replacement roller would be the part #LC33FR.

view full answer...

Answer 11

The Solera Classic Universal Awning Support Arms #LC434720 is designed to replace the arms and springs on your manual Dometic awning. You must have between 81"-96" in height between the top awning rail and where the bottom bracket mounts on…

view full answer...

Answer 12

I took a look at what we have, and the closest I was able to find was the: - Solera Destination Manual RV Awning #LCV000335270-334719 for black. Or -Solera Destination Manual RV Awning #LCV000335296-334718 for white. These awnings measure…

view full answer...

Replacement Awning Tube for 20 Foot Solara RV Awning

Product Page this Question was Asked From

Continue Researching