Recommended Trailer Hitch And 4-Pole Wiring Harness For A 2022 Hyundai Kona Electric

Question

Question:

What hitch do you recommend for a 2022 Hyundai Kona Electric

asked by: Garry

0

Expert Reply:

For A 2022 Hyundai Kona Electric we have the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - 2" # DT52GR. This fully welded, corrosion-resistant Hyundai Kona trailer hitch receiver has a bolt on design and is perfect for all your light-duty towing needs. The black powder coat finish covers e-coat base for superior rust protection.

expert reply by: Kevin C

0

Answer 1

Yes, we do have a 2" hitch for the 2023 Hyundai Kona. It is the EcoHitch item #EH26SR. This hitch is custom fit and bolts to your Hyundai with included hardware. This 2" hitch has a 2,500 lbs towing capacity and a 375 lbs maximum tongue…

view full answer...

Answer 2

The EV version of the 2019 Hyundai Kona is the fully electric version which we have the Draw-Tite Max-Fram Trailer Hitch #DT52GR. This is a class 3 hitch with a 2" receiver opening. This will give you a wide array of bike racks from which to…

view full answer...

Answer 3

Yes, we have confirmed with Curt that the T-Connector Vehicle Wiring Harness #C53ZV will fit with the tail lights on your 2023 Hyundai Kona just fine.

view full answer...

Answer 4

Since your 2022 Hyundai Kona N is going to have LED tail lights you are going to need the Tekonsha 4-way #TK63CR. The Curt #C53ZV is not compatible with the LED tail lights.

view full answer...

Answer 5

Hey Debra! A 2" hitch will definitely work. I recommend the Draw-Tite item #DT52GR. This hitch is custom fit for your 2022 Hyundai Kona SEL. It has a 2" receiver with a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight. If you…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Recommended Trailer Hitch And 4-Pole Wiring Harness For A 2022 Hyundai Kona Electric

Continue Researching